radiant floor panels

Simply replacing regular under-slab insulation with Heat-Sheet radiant floor panels is a cost-effective way to add purchase value to the homes you build. With significantly lower labor costs than the competition and a unique design, Heat-Sheet radiant floor panels are the go-to product for modern home design by equipping homes for easy install of a future radiant floor system without the need for a costly renovation.


Radiant Floor Heating

For homeowners and house buyers alike, radiant heat flooring (RHF) is a welcome addition, especially in basements and slab-on-grade floors. Sadly, the costs of retrofitting RHF into an existing home can be quite steep, and at this point most owners will skip the chance to invest in this otherwise desirable upgrade. Builders are likewise deterred from entirely pre-installing RHF into new homes due to the perceived extra cost. Why spend significantly on an upgrade and risk getting little or nothing in return?

However, roughing in RHF before pouring your slabs is an easy upgrade that will cost you little, yet add tremendous value for your buyers.


This upgrade costs little and adds tremendous value!

RHF rough-ins are not a major addition; they’re more of a shift to the way you insulate floors. Consider this: by swapping your regular under-slab insulation – which you’re on the hook for anyway – for Heat-Sheet panels and some inexpensive pex tubing, you equip the home for a future RHF system at a minimal cost. Should they want to, your buyers can now get their own boiler and connect the system at a later date: no demolition, no rework, no permits, no hassle.

Adding RHF to an existing home is so costly and intrusive, that many buyers would consider paying a premium to have the tubing in their floors already installed and ready to go.


Worried about costs?

When you build homes on a production scale, you may be wary of blowing money on luxury additions. The truth is – you won’t spend that much. Compared to the mammoth expense of installing RHF from scratch, your costs for enabling its future addition are minimal.

Choosing Heat-Sheet’s RHF panels will help keep your spending low. Our 2’x4’, interlocking panels allow for easy, multidirectional installation of the tubes – all you have to do is walk them into place! What’s more, the Heat-Sheet Panels come in a wide array of thermal resistance ratings – R8, R10, R12, and R14, and in most applications, can be used without an added vapor barrier. Here’s what you’ll need to complete the upgrade:

  • Heat-Sheet panels – roughly one panel per 8 ft² of floor space; keep in mind that in most scenarios you’d need under-slab insulation anyway, so this may not add up to much
  • tubing – roughly 1.5 feet per ft² of the slab
  • Heat-Sheet staples – 3-5 for each 180° bend
  • additional 1/2-inch of concrete to account for the nodules in the Heat-Sheet panels

For a better idea of the quantities, check out our one-minute estimator.


Things to keep in mind 

When you choose Heat Sheet’s radiant panels in your projects, there are a few key things you should remember.

First: draft a hydronic design or take photos of the system layout before you conceal it within the slab. These documents will help your buyers plan future remodeling projects around the tubing.

Second: If you subcontracted the work, tell your buyers whom you contracted to install the tubing. For best results, the same company should lay the pipes, connect the boiler, and commission the entire system.

Wrapping it up 

Construction is competitive. We know it, you know it. Want to stay ahead of the pack? Take your product a step further with Heat-Sheet panels and offer your clients a unique, desirable feature without blowing your budget. Our panels are inexpensive, easy to set in place, and give your clients a chance to make their system live later without splurging on a massive remodeling project. Before you pour, ask for Heat-Sheet!








04, 2020

Radiant Floor Rough-ins – A Valuable Upgrade for Builders and Homeowners!

Simply replacing regular under-slab insulation with Heat-Sheet radiant floor panels is a cost-effective way to add purchase value to the homes you build. With significantly lower […]  [...]
04, 2020

Embodied Carbon in EPS vs. XPS

Heat-Sheet saves contractors a lot of time compared to the old way of laying PEX pipe over regular flat XPS insulation panels. That’s what contractors love […]  [...]
03, 2020

EPS Recycling Rate on The Rise

If you are a regular reader of any of the Logix Brands blogs, you’ll know we have been talking about how the construction industry is going […]  [...]
02, 2020

The Seamless Switch to Heat Sheet® Radiant Flooring

Heat Sheet® Radiant floor panels take the traditional installation process of radiant floor heating to a new level. With less labor per install, increased energy efficiency, […]  [...]
08, 2019

Pros and Cons of Radiant Floor Heating

What are the pros and cons of radiant floor heating systems? Radiant floor heating systems are becoming an increasingly popular choice as reported by Canadian Contractor. […]  [...]
07, 2019

What Makes Heat-Sheet® Radiant Floor Panels Better?

With multiple Building Shows reporting that more new homes are choosing radiant floor heating systems (as reported by Canadian Contractor), it’s important for builders and homeowners […]  [...]
07, 2019

What Are Radiant Floor Heating Systems?

Radiant floor heating systems. They are becoming a mainstay in homes today, but exactly what are they? This blog post will answer that very question as […]  [...]